ID Tech IDT3840 Magnetic Card Encoder

The ID Tech IDT3840 magnetic card encoder reader-writer has two magnetic heads to enable it to write and verify data with a single pass. Depending on the model, it is capable of encoding any of two or three tracks at either 75 or 210 BPI density.

The ID Tech IDT3840 magnetic card encoder reader-writer reads and decodes up to three tracks of information with a single swipe. A long stainless-steel card guide ensures better card registration and minimizes alignment problems. Magnetic stripe data is output to a standard RS-232 serial interface.

The ID Tech IDT3840 magnetic card encoder reader-writer verifies the written magnetic stripe data in ISO/ANSI or user-defined formats. Verification status is signaled by a series of three LED indicators.

Compatible with ISO/ANSI, AAMVA, and California DMV formats, the ID Tech IDT3840 magnetic card encoder reader-writer can be programmed using menu-driven operating software. User-programmable features include component tests, read and write functions that display the data, and card comparison routines. Configuration settings can also be user-defined.

ID Tech IDT3840
Magnetic Card Encoder

Prices Starting at $425.00

Reset IDT 3840 - Resets the unit to default values
IDWA-336333 USB Interface or IDWA-332333 RS232 Interface
RS-232 port test - Tests serial port communications
RAM test - Tests the internal memory
LED test - Tests the LED indicators
Sensor test - Tests the card sensor
Read card - Reads a card once and displays the data
Write card - Writes to a card once and verifies the data
Continue read card - Reads card(s) multiple times and displays the data
Continue write card - Writes to card(s) multiple times and displays the data
Copy card - Copies data from one card to another
Compare card - Compares two or more cards to determine if they are identical
Write card from file - Writes cards from a set-up file
Read raw data - Reads raw data and displays it raw or decoded
Write raw data - Writes data to the card without encoding it
Erase card - Erases data on one card for specified tracks only
Sequential write - Writes incrementing data to a series of cards on a specified track
1-Year Manufacturers Warranty

Select com port - Selects serial communication port (Com 1 or Com 2)
Check device model - Displays the model number and card type
Select parity - Selects parity for each track (odd, even, or none)
Select card type - Selects card standards (ISO, CA DMV, AAMVA, or user-defined)
Set leading zeros - Change the number of leading zeros for 210 BPI and 75 BPI
Set BPI for Track 2 - Sets bits per inch for Track 2 (75 or 210)
Check firmware - Displays the current firmware version

Add To Cart

POS Receipt Printer |  Barcode Reader |  Touch Screen Monitor |  Wireless Barcode Scanner 
Barcode Printer |  Barcode Software |  POS Keyboard |  Popular POS Hardware |  USB Barcode Reader 
Retail Pole Display |  Credit Card Reader |  Magnetic Card Encoder | Barcode Slot Reader |  Cash Drawer
POS Receipt Printer Paper |  POS Receipt Printer Ribbon |  Barcode Printer Label |  Barcode Printer Ribbon
Site Map